PIXEL-PAINTER WIFI CONFIGURATION

In this guide, we'll explore how to connect your PIXEL-PAINTER to your WiFi network!

WIFI CONFIGURATION

  1. Turn on your PIXEL-PAINTER.
  2. The PIXEL-PAINTER creates its own WiFi network (This is called "AP-Mode = Access-Point").
  3. On the PIXEL-PAINTER's display, the WiFi name scrolls by in blue: e.g. "PIX_A1B2" or similar.
  4. Go to the WiFi settings on your computer or phone.
  5. Connect to the PIXEL-PAINTER WiFi network (e.g. "PIX_A1B2").
  6. Tap "Yes" if your device asks: "This network has no internet access. Keep connection?"
  7. Now open a web browser and open this address: 
    http://192.168.4.1

    Note: Make sure you wrote http:// without "s" (not https://)!

  8. Now select your regular WiFi network and enter the corresponding password.
  9. If you can't find your WiFi: it only works with 2.4GHz WiFi. Try using a phone hotspot instead.
  10. The PIXEL-PAINTER now saves your settings and restarts.
  11. If you now see only a few blue dots briefly during the restart, it worked!
  12. If you instead see the blue text again ("AP-Mode"), turn the PIXEL-PAINTER off and on again.
  13. If you still end up in the blue "AP-Mode", your WiFi credentials were probably incorrect. Start the WiFi configuration from the beginning again and make sure you have the correct WiFi password.